修复你的物品

维修的权力

商店

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南。

返回指南
英语
中文

正翻译步骤 1

步骤 1
Remove the power supply cable from its connector by pulling it parallel to the logic board. During reassembly of the logic board, pay attention to the position of the I/O connectors. When the board is back in the case, insert a USB or Thunderbolt cable into one of the connectors to align it perfectly.

  • Remove the power supply cable from its connector by pulling it parallel to the logic board.

  • During reassembly of the logic board, pay attention to the position of the I/O connectors. When the board is back in the case, insert a USB or Thunderbolt cable into one of the connectors to align it perfectly.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下，你的投稿已被许可。