注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的9指南。
正翻译步骤 1
步骤 1


-
Remove the four 7.5 mm T8 screws from behind the GPU on the logic board.
注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的9指南。
Remove the four 7.5 mm T8 screws from behind the GPU on the logic board.
These screws are set inside large, spring-loaded Phillips #2 screws. To prevent the larger screws from spinning when you loosen the T8 screws, hold them with a fingertip or Phillips #2 screwdriver.
下一行
上一行
在下面插入新的一行
在上面插入新的一行
缩进当前行
取消缩进当前行
删除当前行
导航到下一步。
导航到上一步。
打开帮助