菜单

你的设置

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的18指南。

返回指南
英语
中文
下一步

正翻译步骤 1

步骤 1
When working on the power supply, be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges. Disconnect the power supply control cable from the power supply.

  • When working on the power supply, be very careful not to touch the capacitor leads or any exposed solder joints on the back of the power supply. Only handle the board by the edges.

  • Disconnect the power supply control cable from the power supply.

小心 切勿触摸电源上的任何电容、导线以及暴露的触点。 只可抓取电源的边缘部分。

在电源处切断电源控制线缆。

在开源创作共享许可协议下，你的投稿已被许可。