Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的24指南

英语
中文

正翻译步骤 3

Step 3
Be careful not to touch any solder joints on the back of the power supply. Capacitors may be charged enough to give you a dangerous shock. Use a spudger to disconnect the power button connector from its socket on the logic board. Use a spudger to disconnect the power button connector from its socket on the logic board.
  • Be careful not to touch any solder joints on the back of the power supply. Capacitors may be charged enough to give you a dangerous shock.

  • Use a spudger to disconnect the power button connector from its socket on the logic board.

小心 切勿触碰任何电源背板上的金属焊点。 电容内可能还有余电,对您造成伤害。

使用撬棒来切断电源键与逻辑板之间的连接。

在开源创作共享许可协议下,你的投稿已被许可