跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的34指南

英语
西班牙语

正翻译步骤 3

步骤 3
Be careful not to touch any solder joints on the back of the power supply. Capacitors may be charged enough to give you a dangerous shock. Use a spudger to disconnect the power button connector from its socket on the logic board. Use a spudger to disconnect the power button connector from its socket on the logic board.
  • Be careful not to touch any solder joints on the back of the power supply. Capacitors may be charged enough to give you a dangerous shock.

  • Use a spudger to disconnect the power button connector from its socket on the logic board.

Ten cuidado con no tocar ninguna de las soldaduras de la parte trasera de la fuente de alimentación. Los condensadores podrían contener suficiente corriente como para darte una descarga peligrosa.

Usa un spudger para desconectar la conexión del botón de encendido de su ranura en la placa base.

在开源创作共享许可协议下,你的投稿已被许可