跳转到主内容

修复你的物品

维修的权力

配件 & 工具

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的24指南

英语
西班牙语

正翻译步骤 2

步骤 2
Unplug the left speaker cable from its socket on the logic board. Be sure to pull straight up out of the socket. De-route the cable from the gap between the hard drive and logic board. If the gap between the hard drive and logic board is too narrow for the speaker cable, disconnect it and leave the cable in place.
  • Unplug the left speaker cable from its socket on the logic board. Be sure to pull straight up out of the socket.

  • De-route the cable from the gap between the hard drive and logic board.

  • If the gap between the hard drive and logic board is too narrow for the speaker cable, disconnect it and leave the cable in place.

Desconecta el cable del altavoz izquierdo de su zócalo en la placa base. Asegúrate de tirar hacia arriba paralelo al zócalo.

Retire el cable a través del espacio entre el disco duro y la placa base.

Si el espacio entre el disco duro y la placa base es demasiado estrecho para el cable del altavoz, desconéctalo y déjalo donde está.

在开源创作共享许可协议下,你的投稿已被许可