Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的43指南

英语
西班牙语

正翻译步骤 2

Step 2
Use the tool like a pizza cutter—roll it along through the gap, and it will cut the foam adhesive through the center. Be sure to always push with the handle behind the cutting wheel. If you pull, the wheel might get pulled out of the handle. Run the tool up along the left side of the display.
  • Use the tool like a pizza cutter—roll it along through the gap, and it will cut the foam adhesive through the center.

  • Be sure to always push with the handle behind the cutting wheel. If you pull, the wheel might get pulled out of the handle.

  • Run the tool up along the left side of the display.

Use la herramienta como un cortador de pizza: gírelo a lo largo del espacio y cortará el adhesivo de espuma a través del centro.

Asegúrese de empujar siempre con la manija detrás de la rueda de corte. Si tira, la rueda podría salirse del mango.

Ejecute la herramienta hacia arriba a lo largo del lado izquierdo de la pantalla.

在开源创作共享许可协议下,你的投稿已被许可