翻译步骤＃10 - iMac Intel 27" EMC 2546 Adhesive Strips Replacement - iFixit

取消

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南。

英语

中文

上一步下一步

正翻译步骤 10

Step 10

The two remaining strips (14 and 15) do not have guide holes and are more difficult to place than the previous ones. Before sticking them down, we recommend first setting them in their respective places on the iMac to get comfortable with their placement.

Grasp the red film pull tab on the 14 adhesive strip and pull to remove the backing from the strip.

Align the strip on the bottom edge of the rear enclosure, directly to the right of the middle screw on that edge.

The two remaining strips (14 and 15) do not have guide holes and are more difficult to place than the previous ones. Before sticking them down, we recommend first setting them in their respective places on the iMac to get comfortable with their placement.
Grasp the red film pull tab on the 14 adhesive strip and pull to remove the backing from the strip.
Align the strip on the bottom edge of the rear enclosure, directly to the right of the middle screw on that edge.
Run your finger along the length of the adhesive strip to ensure it is straight and unwrinkled, pressing down as you go to adhere the strip to the iMac.

在开源创作共享许可协议下，你的投稿已被许可。