Skip to main content

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 4

Step 4
Remove a stick of RAM by grabbing it with two hands and pulling straight out of the RAM tray. RAM modules are keyed so that they can only be installed in the proper orientation. Note where the shorter section of contacts is when removing, and reinstalling, your RAM. To install a new module, insert the module into the desired slot in the tray and press it firmly in place. Push the tray back up until it locks in place.
  • Remove a stick of RAM by grabbing it with two hands and pulling straight out of the RAM tray.

  • RAM modules are keyed so that they can only be installed in the proper orientation. Note where the shorter section of contacts is when removing, and reinstalling, your RAM.

  • To install a new module, insert the module into the desired slot in the tray and press it firmly in place. Push the tray back up until it locks in place.

  • Re-insert the RAM access door back into its place.

用两只手抓住一条内存,然后直接从内存托盘中取出。

内存模块是有方向的的,因此它们只能安装在正确的方向上。请注意,在移除和重新安装内存时,金手指较短部分的方向。

要安装一个新模块,请将模块插入到托盘中所需的槽内,并将其紧紧地按在适当的位置。把托盘往后推,直到它锁好。

重新插入内存门回到它原来的位置。

在开源创作共享许可协议下,你的投稿已被许可