Corsair One i145 M.2 NVME SSD Replacement

英语

中文

上一步下一步

正翻译步骤 3

步骤 3

Corsair One i145 M.2 NVME SSD Replacement, Remove Graphics Card Pwr Connector & Screws: 步骤 0 中的图像 1，3

Corsair One i145 M.2 NVME SSD Replacement, Remove Graphics Card Pwr Connector & Screws: 步骤 0 中的图像 2，3

Corsair One i145 M.2 NVME SSD Replacement, Remove Graphics Card Pwr Connector & Screws: 步骤 0 中的图像 3，3

Remove Graphics Card Pwr Connector & Screws

Due to the limited space available A tool was required to help remove the power connectors. Using pliers to remove connectors that are usually removed by hand can damage your device if you are not careful. Proceed with caution.
Be careful NOT to rock the connector toward/away from you as that can break or bend the connections to the mainboard.
You might need to cut one more wire straps (white) to allow the power connectors to be removed from their housing or for the Graphics Card to be tilted out of the case. Be really careful not to cut any wires when removing the straps.
Use a spudger to slightly lift the connector hooks that are locking the power connectors in place and very carefully, use a 9in Needle-Nose Locking Pliers set to the lowest tension with enough grip to help you slowly and carefully rock the two power connectors gently up and down to pull the connectors out of their housings.
Remove the top and bottom screws that are holding the graphics card in-place

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。