跳转到主内容

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 16

步骤 16
Remove the two Phillips #00 screws securing the vibrator to the rear panel.
  • Remove the two Phillips #00 screws securing the vibrator to the rear panel.

  • These screws are smaller diameter than all the others. Make sure you don't mix them up with the other screws. On reassembly, only these two screws will fit.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可