MacBook Pro 15" Unibody 2.53 GHz Mid 2009 Display Assembly Replacement

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南。

英语

中文

下一步

正翻译步骤 1

步骤 1

Apple sticks a small strip of clear plastic with adhesive applied to one side to the logic board behind the camera cable connector to keep it in its socket. When moving it out of the way, be sure not to break any surface-mount components off the logic board.
Hold the end of the cable retainer down with one finger while you use the tip of a spudger to slightly lift the other end and rotate it away from the camera cable connector.
Pull the camera cable away from its socket on the logic board.
Pull the connector parallel to the face of the logic board, not straight up.