跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的16本指南

英语
中文

正翻译步骤 1

步骤 1
Three Pentalobe screws secure the battery to the upper case. They can be removed with this special driver.
  • Three Pentalobe screws secure the battery to the upper case. They can be removed with this special driver.

  • If you don't have a Pentalobe driver, a 1.5 mm flathead screwdriver can be used in a pinch. Be sure the head of your flathead screwdriver fits snugly across two of the five "points" of the screw head before trying to break the screw free, as a loose fit will easily strip the screw head.

  • If the head of your screwdriver fits too loosely, find a bigger bit and file it down until it fits snugly before proceeding.

  • You do not necessarily have to follow steps 3-7 to remove the battery in order to replace the hard drive. However, it is recommended to remove all power sources from electronics before working on them.

三个五角螺丝将电池固定在上壳上。可以使用此螺丝刀拆除它们。

如果你没有五角螺丝刀,可以在夹点中使用 1.5 mm 平头螺丝刀。在尝试打开螺钉之前,确保平头螺丝刀的头部紧贴螺钉头的五个“点”中的两个,因为松配合将很容易剥离螺钉头。

如果你的螺丝刀头不合适,找一个更大的头并将其归档,直到它完全适合再继续进行。

你不必按照步骤 3 - 7 卸下电池以更换硬盘驱动器。但是,建议在进行操作之前从电子设备中取出所有电源。

在开源创作共享许可协议下,你的投稿已被许可