跳转到主内容

Apple Watch Series 7 电池替换

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 1

步骤 1
Apple Watch Series 7 Battery Replacement, Soften the battery adhesive: 步骤 0 中的图像 1,1
Soften the battery adhesive
  • Prepare an iOpener and apply it to the rear side of your Apple Watch for at least two minutes to loosen the adhesive underneath the battery.

  • A hair dryer, heat gun, or hot plate may also be used, but be careful not to overheat the watch—the display and internal battery are both susceptible to heat damage.

将iOpener 放在在Apple Watch上至少两分钟,以软化电池下面的胶水。

你也可以使用吹风机、热风枪 或是加热板,但要注意不要使手表过热--屏幕和内部电池都很容易受热损坏。

您的所有投稿皆享有基于开源创作共享许可协议(CC BY-NC-SA)著作权利