跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的6指南

英语
中文

正翻译步骤 4

步骤 4
Disconnect the camera cable connector with the tip of a spudger. Push first on one side of the connector, then on the other side to carefully "walk" it out of its socket.
  • Disconnect the camera cable connector with the tip of a spudger.

  • Push first on one side of the connector, then on the other side to carefully "walk" it out of its socket.

  • Pull the camera cable parallel to the face of the I/O board toward the front edge of the Air to disconnect it from its socket.

  • Do not lift upward on this cable as you disconnect it, as its socket may break off the logic board.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可