Opening Procedure

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的73指南。

英语

中文

上一步下一步

正翻译步骤 20

步骤 20

Opening Procedure, Separate the bottom adhesive: 步骤 0 中的图像 1，3

Opening Procedure, Separate the bottom adhesive: 步骤 0 中的图像 2，3

Opening Procedure, Separate the bottom adhesive: 步骤 0 中的图像 3，3

Separate the bottom adhesive

Insert a new opening pick into the gap you just created on the bottom edge of the iPad.
Slide the pick over the antenna, stopping just before the home button.
Only slide the pick towards the home button and not away from it, as you may damage the antenna.
If you need to slide the pick over this section again, remove and re-insert it at the bottom-left corner.
Leave the pick to the left of the home button before continuing.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。