Nothing Phone (1) Rear Glass Replacement

注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的8指南。

英语

中文

上一步下一步

正翻译步骤 2

步骤 2

Nothing Phone (1) Rear Glass Replacement, Insert an opening pick: 步骤 0 中的图像 1，3

Nothing Phone (1) Rear Glass Replacement, Insert an opening pick: 步骤 0 中的图像 2，3

Nothing Phone (1) Rear Glass Replacement, Insert an opening pick: 步骤 0 中的图像 3，3

Insert an opening pick

Secure a suction handle to the bottom edge of the rear glass, as close to the edge as possible.
If the rear glass is cracked, the suction handle may not stick. Try lifting it with strong tape, or superglue the suction handle in place and allow it to cure so you can proceed.
Lift the rear glass with the suction handle to create a small gap between the back cover and the frame.
If you're having trouble creating a gap, apply more heat to further soften the adhesive. Follow the iOpener instructions to avoid overheating.
Insert an opening pick into the gap you created.
Slide the opening pick to the bottom right corner to slice the adhesive.
Leave the opening pick in place to prevent the adhesive from resealing.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。