跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 5

步骤 5
During reassembly, check the clicking action on the trackpad.
  • During reassembly, check the clicking action on the trackpad.

  • The 1.4 mm T5 Torx screw near the front edge of the case must be adjusted correctly.

  • If overtightened, the button will cease to click at a certain point. Adjust the set screw until the clicking side of the trackpad has minimal play.

  • It's not necessary to remove this screw in order to remove the trackpad.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可