跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的29本指南

英语
中文

正翻译步骤 1

步骤 1
To ensure that everything is de-energized and won't turn on while you're working, it is recommended that you disconnect the battery. Grab the clear plastic pull tab attached to the battery connector and pull it parallel to the board toward the front edge of the Air.
  • To ensure that everything is de-energized and won't turn on while you're working, it is recommended that you disconnect the battery.

  • Grab the clear plastic pull tab attached to the battery connector and pull it parallel to the board toward the front edge of the Air.

  • Do not lift upward on the connector as you disconnect it or you risk damage to the connector socket.

为了确保在你工作时一切都处于断电状态,建议你断开电池。

抓住连接到电池接头上的透明塑料拉片,并将其拉向电脑的前边缘,将电池从主板上断开。

断开连接器时,不要向上抬起。

[* icon_note] To ensure that everything is de-energized and won't turn on while you're working, it is recommended that you disconnect the battery.
[* black] Grab the clear plastic pull tab attached to the battery connector and pull it parallel to the board toward the front edge of the Air to disconnect the battery from the logic boardAir.
[* icon_caution] Do not lift upward on the connector as you disconnect itit or you risk damage to the connector socket.
[* black] Grab the clear plastic pull tab attached to the battery connector and pull it parallel to the board toward the front edge of the Air to disconnect the battery from the logic boardAir.
[* icon_caution] Do not lift upward on the connector as you disconnect itit or you risk damage to the connector socket.

在开源创作共享许可协议下,你的投稿已被许可