跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
Your replacement part may or may not come with the front (sensor) bracket. If it does not, you'll need to transfer it to your new cable. Use the tip of a spudger to flip the ZIF connector on the hard drive cable. Gently pull the sensor bracket cable out of the ZIF connector.
  • Your replacement part may or may not come with the front (sensor) bracket. If it does not, you'll need to transfer it to your new cable.

  • Use the tip of a spudger to flip the ZIF connector on the hard drive cable.

  • Gently pull the sensor bracket cable out of the ZIF connector.

  • Use the flat end of a spudger to pry the hard drive cable up off the sensor bracket.

  • Remove the adhesive backing from your new hard drive cable, stick it onto the sensor bracket, and connect the sensor bracket cable.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可