跳转到主内容
英语
中文

正翻译步骤 1

步骤 1
Remove the following 9 screws:
  • Remove the following 9 screws:

  • Two 3 mm Phillips from the edge of the logic board, near the battery

  • Two 4 mm large head Phillips on the port side, from either corner.

  • One 6 mm Phillips near the sleep light.

  • Two 7.5 mm Phillips securing the battery connector to the metal framework.

  • Two 5 mm Phillips from the logic board. These screws may not be present on some models.

  • There will be two screws remaining that secure the airport card cage to the logic board (can't get them all).

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可