Patagonia黑洞®轮式行李袋拉杆更换

英语

中文

正翻译步骤 7

步骤 7

Reinstall the top handle bracket

Place the top handle bracket back into place on top of the handle housing and ensure that the screw holes of the handle bracket align with the screw posts of the handle housing.
Use a Phillips PH2 screwdriver to install the five screws securing the top handle bracket while holding the bracket in place.
Follow the sequential order noted in the third photo.
Gently hand‑tighten the screws to avoid stripping the screw wells.
Lift the handle bracket at each screw location to ensure it's securely in place.

重新安装顶部固定支架

将顶部固定支架复位至拉杆外壳上方，确保支架的螺丝孔与外壳的螺丝柱完全对准。
使用PH2十字螺丝刀安装五颗固定螺丝，同时用手稳住支架。
按第三张照片标注的顺序拧紧螺丝。
手动轻柔拧紧螺丝，避免螺丝孔滑丝。
在每个螺丝位置轻抬支架，测试是否安装牢固。