翻译步骤＃1 - iBook G4 12" 800 MHz-1.2 GHz Rear Display Bezel Replacement - iFixit

修复你的物品

维修的权力

商店

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的10本指南。

英语

中文

下一步

正翻译步骤 1

步骤 1

Use a 1.5mm hex screwdriver to remove the two hex screws on either side of the display (four screws total).

Use a 1.5mm hex screwdriver to remove the two hex screws on either side of the display (four screws total).
If you don't have a 1.5mm hex driver, you can probably get these screws out with a T6 Torx screwdriver. However, if you use a T6 Torx driver you'll be more likely to strip the screws.

在开源创作共享许可协议下，你的投稿已被许可。