跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 7

步骤 7
Once the top half of the drive assembly is detached, turn it upside down. Using a philips screwdriver, carefully remove the 3 final screws located near the bars of the lens assembly.
  • Once the top half of the drive assembly is detached, turn it upside down.

  • Using a philips screwdriver, carefully remove the 3 final screws located near the bars of the lens assembly.

  • Once the the three final screws are removed, the lens assembly can be extracted (as shown in the second picture).

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可