跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 1

步骤 1
At this point, your optical drive assembly should be separated from your GameCube (picture 1). Flip the optical drive assembly upside down Shown in picture 2, remove the 6 Phillips #1 screws with a philips screwdriver.
  • At this point, your optical drive assembly should be separated from your GameCube (picture 1).

  • Flip the optical drive assembly upside down

  • Shown in picture 2, remove the 6 Phillips #1 screws with a philips screwdriver.

  • Once the screws are removed, gently lift and remove the metal plate (shown in picture 3).

  • Be careful not to disturb the brown ribbon cable (highlighted in the yellow).

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可