注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的8本指南。
正翻译步骤 6
步骤 6
Disconnect the remaining button board cables
-
If any connectors are covered with tape, use a pair of tweezers to remove it.
-
Use the pointed end of a spudger to lift up the small locking flaps on the rest of the button board ZIF connectors. Use a pair of tweezers to slide the cables out of their connectors:
-
Disconnect the action buttons cable.
-
Disconnect the touchpad board cable.
-
Disconnect the touchpad cable.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。