跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的7本指南

英语
中文

正翻译步骤 1

步骤 1
Remove the two 8mm Phillips#0 screws on the back cover. The motherboard is attaching the two covers together, so don't separate them entirely just yet.
  • Remove the two 8mm Phillips#0 screws on the back cover.

  • The motherboard is attaching the two covers together, so don't separate them entirely just yet.

  • There is a button that loosens as the Phillips screws are removed. Don't be alarmed if it falls out.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可