翻译步骤＃5 - iHome iD95 Bottom Cover Replacement - iFixit

修复你的物品

维修的权力

商店

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南。

英语

中文

上一步下一步

正翻译步骤 5

步骤 5

Locate the two plastic clips holding the bottom and back cover together.

Which clip you remove first is up to you. Rotate the device 90 degrees either left or right. Insert the flat end of a spudger horizontally between the back speaker and the back cover.

Place the flat end of the spudger behind one clip and pry it open. This may take repeated attempts.

Locate the two plastic clips holding the bottom and back cover together.
Which clip you remove first is up to you. Rotate the device 90 degrees either left or right. Insert the flat end of a spudger horizontally between the back speaker and the back cover.
Place the flat end of the spudger behind one clip and pry it open. This may take repeated attempts.
This is the hardest step because the angle is awkward and the visibility is poor. If possible, have someone hold the device or provide lighting.
Once a clip has been removed, hold the bottom cover open so the clip will not fall back into place. One clip remains to be removed; you are almost there!

在开源创作共享许可协议下，你的投稿已被许可。