跳转到主内容
英语
中文

正翻译步骤 1

步骤 1
Remove the metal casing from the logic board.
  • Remove the metal casing from the logic board.

  • There are three ribbons that connect the lens to the logic board as shown.

  • Place the flat end of the spudger underneath one of the black flaps. Carefully lift the flap with the spudger and gently slide the ribbon out.

  • Repeat the above process to remove the remaining two ribbons.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可