跳转到主内容

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 28

步骤 28
Slowly lift the logic board up and pull the charging port out of its recess. If you can't lift up the logic board, identify where it is stuck and use an opening pick to slice the adhesive there. You can also apply a few drops of high concentration (90% or higher) isopropyl alcohol where it's extra stuck.
  • Slowly lift the logic board up and pull the charging port out of its recess.

  • If you can't lift up the logic board, identify where it is stuck and use an opening pick to slice the adhesive there.

  • You can also apply a few drops of high concentration (90% or higher) isopropyl alcohol where it's extra stuck.

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可