跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的21本指南

英语
中文

正翻译步骤 13

步骤 13
Slowly lift the display from its top edge, being careful not to strain the attached ribbon cables. Remove the two 1.3 mm Phillips screws securing the display connector cover bracket. You may need to angle the driver slightly in order to avoid straining the ribbon cables.
  • Slowly lift the display from its top edge, being careful not to strain the attached ribbon cables.

  • Remove the two 1.3 mm Phillips screws securing the display connector cover bracket.

  • You may need to angle the driver slightly in order to avoid straining the ribbon cables.

  • Remove the display connector cover bracket.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可