跳转到主内容

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 2

步骤 2
Slide an opening pick underneath the home button cable to separate it from the front panel. Gently slide it forward to cut through the adhesive securing the home button cable to the front panel. The cable is secured with some light adhesive.
  • Slide an opening pick underneath the home button cable to separate it from the front panel.

  • Gently slide it forward to cut through the adhesive securing the home button cable to the front panel.

  • The cable is secured with some light adhesive.

  • If the adhesive is stubborn, don't force the pick. Lightly heat the home button cable using an iOpener or a hair dryer to soften the adhesive.

  • Continue sliding the opening pick until you reach the home button bracket.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可