HTC Vive Cosmos LCD 和主板组件更换

注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南。

英语

中文

正翻译步骤 4

步骤 4

Use a T5 Torx driver to unscrew the screws securing the upper component cover and the LCD and motherboard assembly:
Sixteen 4.1 mm long screws
One captive screw
This screw is covered by a sticker. Poke your driver through the sticker to access the screw.
Two 4.1 mm long screws
These screws are covered by stickers. Poke your driver through the stickers to access the screws.

使用 T5 Torx 螺丝刀拧下固定上部组件盖以及 LCD 和主板组件的螺丝：
十六颗 4.1 毫米长螺丝
一颗外加螺丝
该螺钉被贴纸覆盖。将你的螺丝刀穿过贴纸以接触螺丝。
两个 4.1 毫米长的螺丝
这些螺丝被贴纸覆盖。将你的螺丝刀穿过贴纸以接触螺丝。