注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南

英语
中文

正翻译步骤 1

步骤 1
Flip the Apple TV over so that the bottom of the unit is facing up.
  • Flip the Apple TV over so that the bottom of the unit is facing up.

  • You need to remove the rubber base to get access to the screws.

  • Starting at one side of the device, use a hairdryer or a heat gun to soften the adhesive holding the rubber base in place.

  • The rubber base will be hot after heating, take extreme caution while proceeding to avoid personal injury.

  • While the adhesive is still warm, peel the bottom of the rubber base upwards to detach it from the metal plate.

  • Repeat the procedure described above until the rubber base has been completely removed.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可