跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 3

步骤 3
Use the flat end of a spudger to pry the audio board connector straight up to disconnect it from the board. To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.
  • Use the flat end of a spudger to pry the audio board connector straight up to disconnect it from the board.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可