跳转到主内容

注:你正在为你查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的本指南

英语
中文

正翻译步骤 9

步骤 9
Remove the battery assembly.
Remove the battery
  • Remove the battery assembly.

  • If you're installing a new battery, follow the calibration procedure:

  • Charge it to 100%, and keep charging it for at least 2 more hours.

  • Unplug and use it normally to drain the battery.

  • When you see the low battery warning, save your work, and keep your laptop on until it goes to sleep due to low battery.

  • Wait at least 5 hours, then charge your laptop uninterrupted to 100%.

  • If you notice any unusual behavior or problems after installing your new battery, you may need to reset your MacBook's SMC.

移除电池组件。

如果要安装新电池,请遵循校准步骤:

将其充电至100%,并继续充电至少2小时。

拔下电源插头并正常使用以耗尽电池电量。

当你看到电池电量不足警告时,请保存你的工作,并保持笔记本计算机处于打开状态,直到由于电池电量不足而进入睡眠状态。

至少等待5个小时,然后将笔记本电脑不间断充电至100%。

如果在安装新电池后发现任何异常行为或问题,则可能需要重置MacBook的SMC。

在开源创作共享许可协议下,你的投稿已被许可