跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的2本指南

英语
中文

正翻译步骤 4

步骤 4
Grab the adhesive strip's pull tab and slowly pull the adhesive strip out from underneath the speaker. Keep the angle of the adhesive strip as parallel to the laptop as you can. Try to avoid dragging it across the inside of the case.
  • Grab the adhesive strip's pull tab and slowly pull the adhesive strip out from underneath the speaker.

  • Keep the angle of the adhesive strip as parallel to the laptop as you can. Try to avoid dragging it across the inside of the case.

  • Pull the adhesive strip until it's freed from under the speaker.

  • If the adhesive strip breaks, use a heated iOpener, a heat gun, or a hair dryer to help remove the adhesive:

  • Apply heat to the speaker to soften the adhesive underneath.

  • Carefully slide a spudger or opening pick underneath the speaker to separate the adhesive.

抓住胶带的拉条,然后将其从扬声器下方缓慢拉出。

尽可能使胶带的角度与笔记本电脑平行。尽量避免将其拖到机箱内部。

拉起胶带直到它从扬声器下方松开。

如果胶条断裂,请使用加热的iOpener,热风枪或吹风机来清除胶粘剂:

向扬声器加热,以软化下方的粘合剂。

小心地将撬棒或撬棒滑到扬声器下方,以分离胶粘剂。

在开源创作共享许可协议下,你的投稿已被许可