跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的11本指南

英语
中文

正翻译步骤 1

步骤 1
Use the flat end of a spudger to pry up and unlatch the metal locking arm on the battery connector. Make sure the metal arm is completely free of the locking tab before lifting the battery connector. The metal locking arm should easily unlatch. Lift straight up on the metal locking arm to pull the battery connector out of its socket on the logic board.
Disconnect the battery
  • Use the flat end of a spudger to pry up and unlatch the metal locking arm on the battery connector.

  • Make sure the metal arm is completely free of the locking tab before lifting the battery connector. The metal locking arm should easily unlatch.

  • Lift straight up on the metal locking arm to pull the battery connector out of its socket on the logic board.

  • During reassembly, press the battery connector straight down into its socket, making sure it sits flush within the socket.

用撬棒的平端撬起并松开电池接口上的金属锁定臂。

提起电池接口之前,请确保金属臂完全没有锁定卡舌。金属锁定臂应轻松解锁。

垂直向上提起金属锁定臂,以将电池接口从主板上的插槽中拔出。

在重新组装期间,将电池接口垂直向下按入其插槽,确保其在插槽内齐平放置。

在开源创作共享许可协议下,你的投稿已被许可