跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的3指南

英语
中文

正翻译步骤 7

步骤 7
Use a heat gun or hair dryer to soften the adhesive under the black strip along the left side of the front glass panel. Attach a suction cup along the left side of the front glass panel.
  • Use a heat gun or hair dryer to soften the adhesive under the black strip along the left side of the front glass panel.

  • Attach a suction cup along the left side of the front glass panel.

  • Pull up on the glass panel while you use the flat end of a spudger to separate it from the rest of the display assembly.

  • Continue working along the left edge of the front display glass until it is separated from the display.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可