跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的指南

英语
中文

正翻译步骤 2

步骤 2
Use an opening pick to peel back the thin tape belonging to the microphone array. When re-assembling make sure this tape properly sticks to the motherboard by pressing it down with the flat end of a spudger. When re-assembling make sure this tape properly sticks to the motherboard by pressing it down with the flat end of a spudger.
Undo the mic tape
  • Use an opening pick to peel back the thin tape belonging to the microphone array.

  • When re-assembling make sure this tape properly sticks to the motherboard by pressing it down with the flat end of a spudger.

使用三角撬片剥开属于麦克风阵列的细带。

重新组装时,请用撬棒的平坦端将其向下压,以确保该胶带正确地粘在主板上。

在开源创作共享许可协议下,你的投稿已被许可