跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南

英语
中文

正翻译步骤 2

步骤 2
Use a Phillips #1 screwdriver to remove the twelve 6-mm screws that borders the bottom of the laptop.
  • Use a Phillips #1 screwdriver to remove the twelve 6-mm screws that borders the bottom of the laptop.

  • Start with the three screws on the top right corner and work clockwise. This will minimize the chances missing some of the screws.

  • Use a Phillips #1 screwdriver to remove a 6-mm screw that is located in the lower middle, as shown.

  • Use a Phillips #1 screwdriver to remove the three 3-mm screws located in the battery bay.

  • Use a Phillips #1 screwdriver to remove the one 4-mm screw located near the RAM.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可