跳转到主内容

注:你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的2指南

英语
中文

正翻译步骤 3

步骤 3
Push the spudger into the crack separating the two pieces of the phone. Then use the plastic opening tools to pry the back off by separating the two pieces of the phone. Repeat as necessary around the perimeter of the phone until the casing pops off. Use force as necessary without breaking the cover.
  • Push the spudger into the crack separating the two pieces of the phone.

  • Then use the plastic opening tools to pry the back off by separating the two pieces of the phone.

  • Repeat as necessary around the perimeter of the phone until the casing pops off. Use force as necessary without breaking the cover.

  • The back is attached to the motherboard by a wire, so don't pull the back casing off just yet.

在此插入翻译

在此插入翻译

在此插入翻译

在此插入翻译

在开源创作共享许可协议下,你的投稿已被许可