跳转到主内容
英语
中文

正翻译步骤 4

步骤 4
Grab the first pull-tab with your fingers and slowly pull it away from the battery, toward the bottom of the iPhone. Pull hard enough to maintain tension on the strip, but don't force it. Give it plenty of time to stretch and un-stick from under the battery. Don't press down on the battery. Hold the iPhone firmly by its sides.
  • Grab the first pull-tab with your fingers and slowly pull it away from the battery, toward the bottom of the iPhone.

  • Pull hard enough to maintain tension on the strip, but don't force it. Give it plenty of time to stretch and un-stick from under the battery.

  • Don't press down on the battery. Hold the iPhone firmly by its sides.

  • Keep the strip flat and unwrinkled. Try to pull evenly on the whole strip, rather than pulling mainly in the middle or on one side.

  • Pull at a low angle so the strip doesn't snag on the edge of the battery.

  • If the adhesive strip breaks off, try to retrieve it using your fingers or blunt tweezers, and continue pulling—but do not pry under the battery.

  • If any of the adhesive strips break off underneath the battery and can't be retrieved, try to remove the other strips, and then proceed as instructed below.

用手指抓住第一个拉环,然后将其从电池中缓慢拉出,朝 iPhone 的底部移动。

用力拉,以保持条带上的张力,但不要用力。给它足够的时间来伸展并从电池下方松开。

不要按下电池。紧握iPhone侧面。

保持条带平整且无皱纹。尝试均匀拉整个条带,而不是主要在中间或一侧拉。

以低角度拉,这样条带不会卡在电池的边缘。

如果胶条断裂,请尝试用手指或钝镊子将其取回,然后继续拉动,但不要在电池下方撬动。

如果电池下的任何胶条折断而无法取回,请尝试取下其他胶条,然后按照以下说明进行操作。

在开源创作共享许可协议下,你的投稿已被许可