跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的8本指南

英语
中文

正翻译步骤 16

步骤 16
Swing the cover up from the left until the small clip on the right unhooks. Remove the cover. During reassembly, insert the clip on the right edge into its slot first, then hinge the rest of the cover into place.
Remove the front sensor connector cover
  • Swing the cover up from the left until the small clip on the right unhooks.

  • Remove the cover.

  • During reassembly, insert the clip on the right edge into its slot first, then hinge the rest of the cover into place.

从左侧向上旋转保护盖,直至右侧的小夹子解开。

取下盖子。

在重新组装过程中,首先将右边缘的夹子插入其插槽,然后将其余的盖子铰接到位。

在开源创作共享许可协议下,你的投稿已被许可