跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的8本指南

英语
中文

正翻译步骤 14

步骤 14
Use a spudger or a fingernail to disconnect the digitizer cable connector. If any part of your screen doesn't respond to touch after your repair, disconnect the battery and then re-seat this connector, making sure it clicks fully into place and that there's no dust or other obstruction in the socket.
Disconnect the digitizer cable
  • Use a spudger or a fingernail to disconnect the digitizer cable connector.

  • If any part of your screen doesn't respond to touch after your repair, disconnect the battery and then re-seat this connector, making sure it clicks fully into place and that there's no dust or other obstruction in the socket.

用撬棒或指甲断开数字转换器电缆的接口。

如果维修后屏幕的任何部分对触摸均没有反应,请断开电池接口,然后重新安装此连接器,确保其完全卡入到位,并且插槽中没有灰尘或其它障碍物。

在开源创作共享许可协议下,你的投稿已被许可