跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的8本指南

英语
中文

正翻译步骤 13

步骤 13
Use a spudger or a fingernail to disconnect the display cable connector. To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.
Disconnect the display cable
  • Use a spudger or a fingernail to disconnect the display cable connector.

  • To re-attach press connectors like this one, carefully align and press down on one side until it clicks into place, then repeat on the other side. Do not press down on the middle. If the connector is misaligned, the pins can bend, causing permanent damage.

用撬棒或指甲断开显示屏电缆的接口。

要重新连接这样的压接接口,请仔细对齐并向下按压一侧,直到其卡入到位,然后在另一侧重复。不要向下压中间。如果连接器未对准,则插针会弯曲,从而造成永久性损坏。

在开源创作共享许可协议下,你的投稿已被许可