跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的8本指南

英语
中文

正翻译步骤 12

步骤 12
Use a spudger or a clean fingernail to pry the battery connector up from its socket on the logic board. Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.
Disconnect the battery
  • Use a spudger or a clean fingernail to pry the battery connector up from its socket on the logic board.

  • Try not to damage the black silicone seal surrounding this and other board connections. These seals provide extra protection against water and dust intrusion.

  • Bend the connector slightly away from the logic board to prevent it from accidentally making contact with the socket and providing power to the phone during your repair.

使用撬棒或干净的指甲从主板上的插槽向上撬起电池接口。

尽量不要损坏该电路板和其它电路板连接周围的黑色硅胶密封条。这些密封件可提供额外的保护,防止水和灰尘侵入。

将接口弯曲得略微远离主板,以防止其在维修过程中意外与插座接触并为手机供电。

在开源创作共享许可协议下,你的投稿已被许可