跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的8本指南

英语
中文

正翻译步骤 9

步骤 9
If you haven't removed your suction handle or iSclack, remove it now. Open the iPhone by swinging the display up from the right side, like the front cover of a book. Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPhone's logic board.
Open the iPhone
  • If you haven't removed your suction handle or iSclack, remove it now.

  • Open the iPhone by swinging the display up from the right side, like the front cover of a book.

  • Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPhone's logic board.

  • Lean the display against something to keep it propped up while you're working on the phone.

  • During reassembly, lay the display in position, align the clips along the top edge, and carefully press the top edge into place before snapping the rest of the display down. If it doesn't click easily into place, check the condition of the clips around the perimeter of the display and make sure they aren't bent.

如果尚未卸下吸盘手柄或iSclack,请立即将其卸下。

像书的封面一样从右侧向上旋转显示屏,以打开iPhone。

请勿尝试完全分离显示屏,因为几条易碎的带状电缆仍将其连接到iPhone的主板上。

当你在手机上工作时,将显示器靠在东西上,以保持其支撑。

在重新组装过程中,将显示器放置在适当的位置,将固定夹沿顶部边缘对齐,然后小心地将顶部边缘按入到位,然后再向下固定显示器的其余部分。如果无法轻松地将其卡入到位,请检查显示周边周围的夹子状况,并确保它们没有弯曲。

在开源创作共享许可协议下,你的投稿已被许可