跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的8本指南

英语
中文

正翻译步骤 8

步骤 8
The top edge of the display is secured with both glue and clips. Insert your pick into the right edge of the phone. Slide it around the top-right corner and across the top edge. Again, don't insert the pick more than a few millimeters—about the width of the display bezel—or you may damage the front panel sensor array.
  • The top edge of the display is secured with both glue and clips.

  • Insert your pick into the right edge of the phone. Slide it around the top-right corner and across the top edge.

  • Again, don't insert the pick more than a few millimeters—about the width of the display bezel—or you may damage the front panel sensor array.

显示器的顶部边缘用胶水和夹子固定。

将你的三角撬片插入手机的右边缘。将其滑动到右上角并越过顶部边缘。

再次,不要将拨片插入超过显示屏边框宽度几毫米的位置,否则可能会损坏前面板传感器阵列。

在开源创作共享许可协议下,你的投稿已被许可