跳转到主内容

注:你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的9本指南

英语
中文

正翻译步骤 1

步骤 1
Caution: Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
Remove the pentalobe screws
  • Caution: Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

  • Power off your iPhone before beginning disassembly.

  • Remove the two 6.75 mm long pentalobe P2 screws at the bottom edge of the iPhone.

  • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

注意:开始之前,请为iPhone电池放电25%以下的电量。如果意外刺穿,已充电的锂离子电池可能着火和/或爆炸。

开始拆卸前,请关闭iPhone的电源。

卸下iPhone底部边缘的两颗6.7毫米长的五角螺丝。

打开iPhone的显示屏将损害其防水密封性。在执行此步骤之前,请准备好备用密封条,或者如果在不更换密封条的情况下重新组装iPhone,请小心避免液体暴露。

在开源创作共享许可协议下,你的投稿已被许可